نام محصول:
پمپ نوشیدنی
نام انگلیسی:
Beverage pump 41.005.300
برند:
A. u. K. Müller
مشخصات:
This pump is designed for dispense. The use of the pump allows for flexible siting of dispense valves inside the machine, including up to approx. 0,4 metre (15,7 inch) above the water level in the boiler.
Varying the voltage supplied to the pump will change ist speed and thus vary the flow rate output.
The impeller is driven by a longer shaft which locates the motor 58 mm above minimum fill level of the boiler.
The pumps body housing is suitable for use with hot water.
Applications
Hot / cold drink dispensers
tank filling
Increase output pressure on low water level boilers
Characteristics
Low running noise
basic interference suppression in motor
Technical data
mode of operation not self priming
Fitting position Motor upwards
Media Cold and heated potable water and physically and chemically similar media
Duty cycle 100%
Protection type IP 00 according to EN 60529
Motor connections Tyco 280609-2
Basic interference suppression Capacitor across terminals
Insulation class B according to EN 60730
Protection Class III according to EN 60730
توضیحات:
Fluid
for hot water, for chemicals, beverage
Operation
with DC motor
Priming
semi-submersible
Technology
centrifugal
Mobility
mobile
Domain
for the food and beverage industry
Applications
metering, distribution, for boiler
Material
plastic
Voltage
24 V, 12 V
Other characteristics
automatic
Flow
3 l/min, 3.6 l/min(0.79252 us gal/min, 0.95102 us gal/min)
Pressure
71 mbar, 102 mbar(1.03 psi, 1.479 psi)
Fluid temperature
Max.: 95 °C(203 °F)Min.: 0 °C(32 °F)
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.