نام محصول:
نوار توده مسطح
نام انگلیسی:
Flat mass braid
برند:
TESORAX
مشخصات:
Our flat braids are formed from a conductor made of bare annealed or tinned electrolytic copper wires. Training according to EN 13602.
Wiring: The copper wires are interwoven and twisted together, with a pitch according to the section or cover.
Flat copper braids are very flexible and have a small bend radius. The flat braids are manufactured with single wires Ø 0.10 mm or Ø 0.25 mm, which can make sections from 0.75 mm² to 500 mm². On request, we can insulate them, with different materials:
Plastics (PVC or LSHF).
Textile (nylon, polyester, etc.)
Large sections can be obtained by overlapping several layers. The unit sections are limited, which may present a disadvantage, as is the lateral flexibility which is limited.
These braids can be applied for: connections, manufacture of electrical equipment, protection and earthing equipment, sockets, lightning rods, transformation centers, etc. Copper cables can also be used for earthing.
The thinner the wire diameter, the more flexible the final braid will be. Depending on the diameter chosen and the number of strands, the flexibility class of the flat braid can be from semi-flexible to extra flexible, depending on the desired end use.
Our copper wires are of Cu-A1 quality: Cu-ETP guaranteeing a copper content greater than 99.9%.
Do not confuse the actual section of the flat copper braid with the visible section. The real section is obtained by taking the sum of the section of each wire making up the braid, while the apparent section is equal to the section which results from the external dimensions of the braid and is equal to approximately 2 times the real section.
توضیحات:
Material
copper
Other characteristics
flat
Norms
EN 13602
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.