نام محصول:
سیلندر پنوماتیک
نام انگلیسی:
Pneumatic cylinder 40 series
برند:
CAMOZZI AUTOMATION
مشخصات:
» In compliance with ISO 15552 standard and with the previous DIN/ISO 6431- VDMA 24562 standard
» Adjustable pneumatic cushioning
» Rolled stainless steel rod (Ø 160 – 200 mm)
» Chrome plated steel rod (Ø 250 – 320 mm)
» Rod scraper in brass (Ø 160 – 200 mm)
» ATEX
Series 40K cylinders comply with the ISO 15552 standard and can be assembled with the entire range of standard accessories.
A permanent magnet on the piston of these cylinders is able to send, through proximity switches mounted on the cylinder sliding axis, electrical signals to indicate its position.
This series is normally equipped with end-stroke cushioning which can be adjusted through a screw on the end block.
Materials – coated AL end blocks
AL piston
rolled AISI 420B stainless steel (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) rod,
zinc-plated steel rod nut,
anodized AL tube,
zinc-plated steel tie-rods and tie-rod nuts,
NBR-PU rod – piston and cushion seals,
brass rod scraper ring
Mounting – front flange, rear flange, foot mounts, centre trunnion, front and rear trunnion
Fluid – filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
توضیحات:
Type
pneumatic
Technology
magnetic piston, tie-rod, with through rod
Configuration
double-acting
Material
stainless steel, steel
Norms
ISO 15552
Other characteristics
standard, with adjustable cushions
Stroke
Max.: 2,500 mm(98.425 in)Min.: 10 mm(0.394 in)
Pressure
Max.: 10 bar(145.04 psi)Min.: 1 bar(14.5 psi)
Speed
Max.: 500 mm/s(1.64 ft/s)Min.: 10 mm/s
Ambient temperature
Max.: 80 °C(176 °F)Min.: 0 °C(32 °F)
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.