نام محصول:
اگزکتور ونتوری بدون روغن
نام انگلیسی:
Oil-free Venturi ejector BlastMatic
برند:
LSP Industries, Inc.
مشخصات:
BLASTMATIC – AUTOMATIC PARTS EJECTION SYSTEMS
The BlastMatic line offers an air ejection system for every application from the extremely sophisticated to the very basic. The BlastMatic II is the ultimate Electronic Parts Ejector. By using the BlastMatic II’s Electronic Controls you tab in the précise instant during the stamping cycle when a blast of air is to come on, as well as the length of time the air is to stay on to insure that the part is safely ejected from the die area. Costly unscientific trial and error cam adjustments are a thing of the past. The Basic BlastMatic is an effective, economical alternative to the BlastMatic II, using some of its components less the electronic controls. In operation, the Basic BlastMatic receives a signal from the Actuator Switch or a Solenoid Valve.
HOW THE BLASTMATIC WORKS.
The BlastMatic Nozzle Assemblies are designed with air stored 6 inches from the nozzle tip at the Univalve. When signaled by the press the Controller opens the Univalve allowing the air out the nozzle for the programmed time and duration to eject the stamped part. When the Controller turns off the UniValve goes into the rest mode.
More Efficient Parts Ejection Systems
Area A: Air expended bringing the system up to force. The BlastMatic II shows a marked decrease in air use, because it is valved on/off at the unit.
Area B: Air requird to do the job. This area represents the absolute smallest volume of area needed to eject the part.
Area C: Air wasted due to inefficiencies. The BlastMatic II is shown to be more effective because of its focused air stream.
توضیحات:
Lubrication
oil-free
Number of stages
single-stage
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.