The Formfutura Platinum LCD Resin Series is our range of general purpose photopolymer LCD resin, which is specifically engineered to work with all open source LCD and DLP 3D printers in the range of 385 – 420nm.
Our Platinum LCD resin is almost odourless and allows you to 3D print objects with extremely high accuracy and relatively short curing times.

Unique features
•Almost no odour – Compared to other resins on the market our Platinum LCD resin is relatively odour-free!
•UV & weather resistant
•Fast printing with short curing times
•High accuracy
•Vivid colours with an extremely high level of colour fastness
oTruly opaque and translucent colours available
oNo discolouration and/or yellowing
•Low shrinkage
•Compatible with all open source LCD and DLP in the range of 385 – 420nm

Resin properties (uncured liquid)
•Viscosity: 500 cps at 25°C
•Density: 1.18 g/cm2

Preparation(s) before starting to print
1.Shake the bottle for at least 2 minutes before each use.
2.After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
oThe resin can be poured back from the vat into the bottle once your print is finished
3.Always use protective measurements like safety glasses and nitrile gloves when handling resins.

General printing guidelines
Base Curing Times at 50 micron
•Translucent Black: 12sec
•Translucent Aquamarine: 10sec
•Translucent Blue: 12sec
•Translucent Red: 11sec
•Solid White: 12sec
•Solid Black: 14sec
•Solid Light Grey: 13sec

Color : white, gray, red, black, blue