Integrated primary transducer
Explosion-proof version
RS-485 Digital output
4-20 mA output version available

ZET 7012-A-VER.1 digital pressure meter is used for fast and simple absolute pressure measurements and measured values data transfer in digital format via RS-485 or 4-20 mA interface.

ZET 7012-A-VER.1 digital pressure meter is intended for integration into various technological processes automated control systems.

Digital pressure meter ZET 7012-A-VER.1 consists of primary transducer and integrated measuring module.

The measuring unit digitizes the signal from the converter and transmits the pressure value in a digital form via RS-485 interface by means of Modbus protocol or via data transfer interface “Current loop” (4-20 mA). The membrane of the primary transducer is made of a silicon plate. The strain resistor circuit (bridge connection) is implemented on the basis of the “silicon on sapphire” technology (SOS). This allows to perform inertia-free dynamic measurements up to 1,000 Hz. In contrast to metal membranes with glued bridge strain resistors, SOS membranes allow to register pressure change at the level of 0.00001 from the upper scale of the range. Sensitivity of the electronic amplifier is 15 nV reduced to the input.

ZET 7012-A-VER.1 digital pressure meter is equipped with an integrated cable. Depending on design version, the pressure meters are delivered whether with contact output for connection via 4-20 mA interface or RS-85, or with a cable plug FQ14-7TJ-8 for connection to RS-485 interface (connection to measuring network is performed by means of ZET 7002 connector).

Measured value : pressure
Technology : digital
Other characteristics : for integration, explosion-proof