Mid-Infrared Fiber Spectrometer S2050
– a new paradigm in mid-infrared light detection

Mid-infrared (MIR) spectroscopy is used in both industry and research for non-invasive characterisation of gasses, liquids and solids as well as characterisation of light sources. The NLIR MIR Fibre Spectrometer is based on a novel measurement scheme that upconverts the MIR light to near-visible light. Silicon-based near-visible light detectors, for example CCDs, are far superior to MIR light detectors in terms of detectivity, speed and noise. The NLIR upconversion technology therefore brings these attractive features, and the advantages that follow, to the MIR regime.

Our Fiber Spectrometer can be used in a variety of applications:

Characterization of
CW light sources
Super Continuum sources
Laser spectrum analysis
Laser production certification
Combustion, flame and fire analysis
Characterization of geological samples

Carbon Hydrate Gas monitoring
Environmental Gas detection
Oil in water / water in oil detection
Food storage gas analysis
Transmission and reflection spectroscopy of
– Coatings
– Composite materials
– Foils

Mid-Infrared Fiber Spectrometer S2050
Bandwidth – 2.0 – 5.0 µm / 2000 – 5000 cm-1
Resolution – 6 cm-1
Exposure time – 11µs – 1 s
Maximum spectrum readout rate – 400 Hz
Minimum input power at 3.7 µm at 1 s – 5 pW / nm
Saturation input power at 3.7 µm at 11 µs – 0.1 mW / nm
Bit depth – 16 bit
Optical input – 200 µm InF multimode fibre (Free space optional)
Connection – Ethernet or USB
Physical dimensions (h × l × w) – 90 mm × 275 mm × 175 mm

Type : mid-infrared
Field : for gas analysis, food, for oil industry applications
Configuration : benchtop
Wavelength : Min.: