The use of high-precision radial groove ball bearings is especially recommended when axial forces are supported in two directions, but the installation space makes the use of a spindle bearing pair impossible; plus when the best-possible guide for rotating components is needed, but the RPM requirements are less important.

Depending upon the load capability and the installation space available, GMN provides deep groove ball bearings in sizes 60 and 62 as per DIN 625.

A large selection of various cages, lubricants and covers make it possible to adapt GMN deep groove ball bearings to any application.

SERIES 60.. AND 62..
_Universally deployable
_Takes axial and radial forces in both directions
_Reference characteristic RPM’s: 0.6 · 106 mm / min (steel cage)
_Also available as a hybrid ball bearing

SERIES Z
_Design with one shield

SERIES 2Z
_Design with two shields

SERIES X2Z
_Bearing with over-wide and two shields
_Reference characteristic RPM’s: 1.0 · 106 mm / min

Rolling element : ball
Configuration : radial, deep groove
Material : steel
Other characteristics : high-speed, with cage, high-precision, low-noise, low-friction, hybrid
Applications : for industrial machines, for machines
Inside diameter : Max.:
Outside diameter : Max.:
Width : Max.: