INSTALLATION FOR STACK ISOLATION BY EPOXY RESIN
The only sustainable technology to provide a continuous and resistant dielectric coating in armature of electric motors No dust pollution in the environment. Absolute safety for people

ATEX 2014/34 / EU CERTIFIED PLANT FOR STACK ISOLATION BY EPOXY RESIN APPLIED WITH SPRAY COATING TECHNOLOGY

Safety equipment:
Explosion suppression device with Sodium Bicarbonate (SBC)
Inerting system for the resin spraying booths according to the UNI EN 1127-1

Armature dimensional range:
Lamina stack diameter: from 19.0 to 50.0 mm
Lamina stack length: from 15.0 to 45 mm
Shaft diameter: 4.0 to 8.0 mm

Technological flow:
Taking the armature from the production line
Transport to the loading position on the resin coating machine
Lamina stack length control
Load armature on resin coating equipment
Armature induction heating
Introduction of the armature in the spray booth; application with spray coating method of the resin and curing of the film
Discharge armature on conveyor towards post curing station of the resin film
Armature cooling
Unloading the isolated armature on the pallet of the production line

Performances:
7.5 sec / piece for lamina stack âˆ… 45.0 mm stack length from 19 to 45 mm
6.0 sec / piece for lamina stack âˆ… 24.0 mm stack length 40 mm

Options : continuous