BRUSHLESS SERVOMOTOR WITH INTEGRATED DRIVE.

EN: Brushless servomotors with integrated drive. Power from 125 to 250 W

MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.

Rated torque up to 0.75 Nm.

DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 16bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.

All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.

AC/DC : three-phase, DC
Type : brushless
Voltage : 48V, 24V
Protection class : IP65
Configuration : permanent magnet
Number of poles : 4-pole
Other characteristics : CANopen, EtherCAT, integrated-drive
Torque : 0.75 Nm (0.5532 ft.lb)
Power : Min.:
Rotational speed : 3,000 rpm (18,849.56 rad.min-1)