Our DC range of motors is now complimented with a brushless DC option that features an inner rotor with integrated electronics for step-less speed control and exceptionally quiet operation with a longer life than that of the brushed motors. These highly efficient BLDC motors are suitable for continuous operation and can be supplied as a motor only or fitted to one of our gear boxes – see FBB T3 and UBB T6 gear motor series for output speed and torque ranges.

• Rated voltage 24VDC
• Bi-directional
• PWM speed control
• Speed signal feedback: six pulses per revolution
• Locked rotor protection
• Exceptionally low noise levels
• Integrated current protection 2.5 Amps
• Life up to 10,000 hours depending on usage
• 125+/-15 °C Thermal shutdown temperature

With all the functionality included into the design of this BLDC motor it is versatile yet strong enough to operate in many applications.

1. Operating voltage range: 8-26VDC.
2. Motor axial end play: 0.05-0.5mm.
3. Measuring method for motor output shaft extension: push the rotor against the end cap to measure the shaft extension.
4. Cable connection method:
4:1 When the red wire is connected to the positive pole if the power supply (+) and the black and blue wire are connected to the negative pole of the power supply (-) the motor direction is CW when viewed output shaft side of the motor.
4:2 When the red wire is connected to the positive pole if the power supply (+) and the black, blue and yellow wire are connected to the negative pole of the power supply (-) the motor direction is CCW when viewed output shaft side of the motor.

AC/DC : DC
Type : brushless
Voltage : 24V
Other characteristics : high-efficiency, low-noise, with speed controller
Torque : Max.:
Power : 9.407 W, 14.324 W, 24.229 W (0.013 hp)
Rotational speed : Max.:
Current : Max.:
Operating temperature : Max.:
Diameter : 36 mm (1.42 in)