The reversing contactor BH 9253 is used to reverse the direction of
3-phase asynchronuos motors by switching 2 phases. An electrical interlocking disables the control of both directions at the same time. The reversing
contactor has a short on and off delay time. When reversing the phases a
switchover delay is guaranteed.
Temperature sensing
To protect the power semiconductors the unit incorporates temperature
monitoring. When overtemperature is detected the power semiconductors
swith off and an output relay as well as a red LED is activated. This state
is stored. When the temperature is back to normal the semiconductors can
be activated again by switching off and on the control voltage.
Features
• According to IEC/EN 60 947-1, IEC/EN 60 947-4-2
• Switching at zero-crossing
• To reverse 3 phase asynchronuos motors up to
5.5 kW / 400 V (7.5 HP / 460 V)
• Electrical interlocking of both directions
• Temperature monitoring to protect the power semiconductors
• Measured nominal current up to 20 A
• LEDs for status indication
• Galvanic separation between control circuit and power circuit
• 45 mm; 67.5 mm; 112.5 mm width
Function : reversing
Technology : solid-state
Reviews
There are no reviews yet.