Operating status LED front green / yellow
RTD inputs – TC – mV – Ohm – potentiometer – mA – V
Outputs 0÷20mA – 4÷20 mA – 0÷10 VDC – Relay
Degree of protection IP50 – IP20
Universal power supply 21.6 ÷ 253VAC – 50÷60Hz – 19.2÷300VDC
In a few seconds you can program the transmitter 5116B for the required application.
Using the button on the front of the input can be calibrated to the field of the current process.
The drift of the zero signal for process signal can be corrected by pressing the front button.
The operating status is indicated by LED green front.
The yellow LED indicates the action of each relay.
Continuous check of vital stored data.
3.75 kVAC galvanic isolation of 3 doors.
DIN rail mounted horizontally or vertically.
In a linear meter of space framework you can be mounted up to 42 modules.
Measurement of electronics temperature linearized signals from thermocouples or RTD
Conversion of linear resistance variation to a standard analog current / voltage, for example from solenoids, butterfly valves or linear, via a potentiometer.
Power supply and signal isolator for 2-wire transmitters
Process control with two voltage-free relay configurable for advanced
Galvanic separation of analogue signals and measurement of floating signals.
In a few seconds you can program the 5116B for application request
Using the button on the front of the entrance can be calibrated to the field of the current process. The drift of the zero signal for process signal can be corrected by pressing the front button.
Mounting : DIN rail mount
Input type : RTD
Output signal : analog
Applications : process
Reviews
There are no reviews yet.