Radio receiverAF Series

Energy Harvesting Receivers

Description

Energy Harvesting receivers are available as either a packaged module, or as a “RF stamp” with wire antenna without plastic housing. The receiver module has multiple output options (i.e. RS232 TTL) and is suitable for wall-mounting. Flexible pairing allows the operation of several receivers with one switch and vice-versa, and the “Unique ID” assigned to each switch assists in avoiding interference when using multiple RF switches. Both receivers are compatible with ZF rocker and snap action switch products. See table at base of page for more information on standard products.
Technical Specifications RF Receiver

Frequency bands: 868.3 or 915.0 MHz
Temperature range: -40 to +85 °C (-40 to +185 °F)
Sensitivity: typ. -98 dBm
Receiver class: Class 2
Supply voltage: 5 VDC stabilised
Supply voltage: 7 V to 24 VDC non-stabilised
Supply voltage: 5 V USB
Output Interfaces: 48 VAC or 230 VAC relay
Output Interfaces: RS232 TTL, RS232 or RS485 bus
Output Interfaces: Digital interface or SPI
Output Interfaces: USB 2.0
Antenna: Wire antenna with plastic sleeve
Antenna: 50 Ohm output

Technical Specifications RF Stamp Receiver

Frequency bands: 868.3 or 915.0 MHz
Temperature range: -40 to +85 °C (-40 to +185 °F)
Sensitivity: typ. -98 dBm
Receiver class: Class 2
Supply voltage: 5 V or 3.3 VDC
Output Interfaces: 1x UART
Output Interfaces: 4x GPIO
Antenna: Wire antenna
Antenna: 50 Ohm output

Type : radio
Applications : industrial
Interface type : USB, RS232