RM169-1
Radiomodem 169MHz, RS232/RS485 interface and complies with Directive 2014/53/EU (RED)
The RM169-1 is a NBFM (Narrow Band Frequency Modulation) system in the 169 MHz band and RS232/RS485 interface compliant with Directive 2014/53/EU (RED). It is optimized to be powered also by primary or secondary batteries in Meter Reading, Tracking&Tracing, Telemetering&Commands applications in compliance with ERC 70-03 and European Resolution 2005/928/EC. The module offers different programmable operating profiles via software such as point-to-point, point-to-multipoint, broadcasting and digirepetear; it supports routing tables for package addressing and routing in areas not directly reachable on a single route.
Sales Note
For parameters’ modification, general programming and Repeater I/O’s operating mode selection, you need CS-DB9M-DB9F cable and an SENECA S117P1 USB/RS485 converter.
For point-to-multipoint RS485 connections, you need CS-DB9M-TIP cable. Please check your cart before proceeding with the order.
TECHNICAL DATA
POWER SUPPLY9-32 Vdc
OPERATING BAND169.400 – 169.475 Mhz
NUMBER OF CHANNELS1@CH50kHz; 3@CH25kHz; 6@CH12.5kHz
MODULATION9K00F1D or 18K0F1D (NBFM / GFSK)
DATA SPEED (RADIO)4.800 bps (@12,5 kHz di canalization)
9.600 bps (@25 kHz di canalization)
19.200 bps (@50 kHz di canalization)
OPERATING MODESPoint-to-point, point-to-multipoint, Broadcasting, digipeater; support of routing tables for addressing
COMMUNICATION VIA RS485RS485 serial port communication parameters are set by default in 9.600 (Baud Rate) 8N1.
Type : point-to-point, repeater
Network : RS232, RS485, radio, USB
Reviews
There are no reviews yet.