Hand-held Atomic Fluorescence Spectroscopy Mercury Vapor Analyzer

The Jerome® J505 Mercury Vapor Analyzer is a portable fluorescence spectroscopy analyzer, which allows the detection cell to be simpler, smaller, lighter weight and more durable than competing spectroscopy instruments. The highly efficient optical cell requires less flow to purge the system, allowing the J505 to run at a lower flow rate minimizing sample dilution as found in competing spectroscopy instruments.

• – Lightweight:
Weighs only 6.5 pounds, less than half that of some atomic absorption mercury detectors.
• – No downtime:
Because the J505 uses atomic fluorescence to detect mercury, no regenerations or downtime are needed.
• – Sensitive:
Meets and exceeds EPA standards for industrial and residential remediation actions.
• – Few Intereferences:
With 18 hours of battery life per charge, the J605 is always ready when you need it.
• – Proven:
The Jerome J505 is in active use by the EPA, Los Angeles County, the City of New York and many others.

Specifications

Detection Range: – 0.05 µg/m3 to 500 µg/m3
Resolution: – Standard Mode: 0.01 µg/m3 (10 ng/m3)
Quick Mode: 0.1 µg/m3 (100 ng/m3)
Search Mode: 0.1 µg/m3 (100 ng/m3)
Accuracy: – ±15% at 0.3 µg/m3
±10% at 1 µg/m3
±10% at 25 µg/m3
±10% at 100 µg/m3
Response Time: – Standard Mode: 28 seconds
Quick Mode: 16 seconds
Search Mode: 8 seconds, then updates in 1 second intervals
Flow Rate: – 1 L/min
Result Units: – ng/m3, µg/m3, mg/m3
Autosample Intervals: – 1, 2, 5, 10, 15, 20, 30, 45, 60 or 120 minutes
Integrated Data Storage: – 10,000 test results; retains date, time and up to 100 locations

Type : atomic fluorescence
Field : industrial, for mercury analysis
Configuration : handheld
Other characteristics : high-sensitivity, USB